Most everyone would love to gain some extra room, especially those in small homes with limited space options. Here are three home interior DIY projects to help you maximize your space.
1. Transform a Closet into Workspace
If you’re lacking the room for a home office, transform one of your closets into a mini-office. This is a relatively easy and inexpensive way to give yourself a dedicated workspace.
- Remove the door and hinges.
- Empty the closet and give it a good wipe down.
- Disassemble hanging rods.
- Touch up or repaint the closet’s interior.
- Add two to three shelves—a deep one to serve as your desktop and additional ones for storage.
If you prefer a traditional desk and your closet is wide enough, slide one in and eliminate the need for a deep shelf.
2. Mount Your TV
Modern styles are all about minimalism and entertainment centers don’t exactly fit this look. Besides, media consoles take up a ton of floor space. An easy way to reclaim this useful space is to mount your TV to the wall or above a fireplace.
- Choose a mount for your TV—this will be a tilting mount, low-profile mount or full-motion mount.
- Select a location and determine the best viewing height—be sure you have sufficient outlets and access to cable connections you need.
- Cut out a piece of TV-sized cardboard or poster board and tape it to the wall to get a “visual” of your TV’s position.
- Locate a stud and mark it. (If mounting to a fireplace use masonry anchors.)
- Before you drill, use a level to ensure the wall mount is even.
- Drill holes, attach your mount and secure it so it doesn’t collapse.
- Add a cord cover to hide unsightly wiring.
Media consoles were useful before flat-screen TVs became the norm, but most people today can easily get by with a wall-mount and a shelf to hold cable boxes, media players or game consoles. If you need additional storage, add a small table with cabinet space.
3. Build Window Seats
Adding window seats to any room eliminates the need for extra seating on the floor, gives a cozy look and offers additional storage space.
- Buy two wall cabinets about 30 inches wide by 15 inches high. You can purchase new or, to scale back costs, check secondhand stores, such as Habitat for Humanity’s Restore, for used cabinetry.
- Use plywood (2×4 or 2×6) to serve as a perimeter base, nailing these pieces of wood into the floor to create a toekick. Be sure your outline’s depth is large enough to hold your cabinets, and leave a little extra room to pull your cabinets away a few inches from the wall beneath the window to save space for your seat.
- Place cabinets on top of the toekick and clamp the two cabinets together. Be sure your screws are strong enough to hold the units together.
- Clamp and screw cabinets to the toekick.
- Place hardwood plywood on top of the cabinets to widen your seating area. (Sand and paint, if necessary.)
- Add cushions and pillows.
Tip: Be sure to avoid positioning your seat over an HVAC vent or baseboard because you don’t block out your heat or A/C.
If you’re working with some tight spaces, you can better utilize it by transforming your existing space.